Image
image
image
image




Water King
Electronic/Electromagnetic Water Conditioners


Overview
Plumbing Requirements
Location
Suggested Specifications
Size Selection
Commercial Schematics
Residential Schematics
Installation Instructions and Catalogues
Plumbing Requirements
Location
Suggested Specifications
Size Selection
Commercial Schematics
Residential Schematics
Installation Instructions and Catalogues

NB: These diagrams are illustrative for siting of Water-King units. They are not intended to be examples of definitive domestic water services.

Commercial Schematics

Vented System with Direct Fired Water Heater
Unvented System with Calorifier
Cold Water Storage Tank with Booster Set
Offices and dwellings with local Electric Water Heaters


vented_system_diagram
click image for larger view
High Level Cold Cistern With Low Level Plant Room


Treat the CWDS close to the water heater with a second unit on the HWSR after the circulation pump. One of the CWS drops from the header is treated with a third unit.

Unvented Calorifier Diagram
click image for larger view

Hot Water Storage Pumped to Water Heater


Locate a Water-King after the pump. On low water content finned type water heaters it should be on the return. On plate and frame heat exchangers it may be fitted on the return only.


Col Water Storage Tank with Booster
click image for larger view

Cold Water Storage Cistern with Booster Set


A Water-King is fitted to the common cold services on the outlet of the booster set. A second Water-King is fitted to the HWSR.

offices POU Electric Water Heaters diagram
click image for larger view

Electric Water Heaters in Offices


Due to the length of time the water resides in the heater, it is best to treat each heater with a dedicated Water-King unit.


NB: These diagrams are illustrative for siting of Water-King units. They are not intended to be examples of definitive water services.

image



menu
image