Water King Plumbing Requirements
Water-King units require between 25 and 50 cm of straight pipe run. Copper or other metallic pipes are best, but it can be installed on all types of plastic pipe. It cannot be fitted to lead pipe. The pipe does not need to be cut, there is no plumbing involved, nor is there any requirement for an isolating bypass with associated valves. Insulation may be fitted over the pipes after installation.
Power Requirements
Each unit requires mains voltage supply within one metre of the unit. The unit should be located within 45 cm of the pipe being treated.
Evaporative Systems
Where appliances are designed to operate by make up water and evaporation, such as cooling towers or humidifiers, adequate provision must be made to clear the build up of any sludgy deposits by regular “blow down” or other means.
Wk1
WK2
WK3
WK4